Installing Led Puck Light
Led puck light – Led lighting has become very popular in recent years, mainly due to their ability to cost savings. They use less voltage than typical light and offers more in terms of actual lighting. For this reason, people decided to have LED lights that are installed in their home. Lighting can be installed anywhere you want to, because they are so versatile. However, it is usually found in the kitchen or bathroom, where lighting is one of the key elements in the room. Lamp installation is fairly easy, but may require the use of electricity.
The first thing that must be done with led puck light to prepare for the installation. It doesn’t matter if you want to do recessed lighting or surface; the preparation is the same, just use the surface of the ring after the area marked the recessed lighting. Prepare for thirty pieces, you have to remove the cover the LED light lights by pushing against the light leap out of the surface of the ring. Once this is done, you can start the installation process.
Mark the area where it will be installed. You can do it the backbone of the ring surface in an area where you want to install lighting and mark where the screws. It allow the screw installation hole so that it is easy. Do you want to mark the point where you need to feed the wire leads. Screw the ring surface areas shown on the marked places. After you finish, you can feed the wire led puck light through the housing, if you have previously chosen to run the wire with surface mount and use cable clips that come with the lights on.