How to Anchor a Modern Curio Cabinet
Modern curio cabinet – Anchoring a curio cabinet is a safe and easy way to protect your valuables. A curio cabinet is usually made of glass and wood and collectibles shows, often made of delicate glass. Many curiosities also have a backup mirror, all of which make very delicate modern curio cabinet items in need of stability. Anchors are vital for the storage of much value in such a vulnerable box. Most of the interior walls are made of drywall so using the type of anchor and limit the weight of the cabinet itself must bear is important.
Anchor a modern curio cabinet; locate the studs in the wall behind the cabinet of curiosities. Use an electronic stud finder or simply touch the wall with a hammer feeling for the main uprights. You may have to slightly move the machine to sit in front of a stallion. Measure the height and width of the cabinet of curiosities. Divide it into four sections. Check the dividing line between sections of the back of the cabinet with a carpenter’s pencil. Make sure that at least one of the points aligns with a stud.
Install two L – brackets on the top rear of the cabinet of curiosities, near the center. Position the lower arm of the bracket against the wall while the longer arm is at the top of the cabinet. L – Brackets fit in the upper corners inside the cabinet and screw through the bracket on the wall. Place a second screw through the bracket and into the cabinet itself. Set the modern curio cabinet to wall studs to drive a screw into the back of the cabinet and the wall.