Led ceiling light fixtures – Most ceiling light fixtures are mounted in an electrical box secured to the wooden frame behind the drywall or other material from the surface with nails or screws. Lamps, ceiling fans and other heavy accessories are mounted often braced for special boxes, which have metal bars holding the box between the frame members. All ceiling fixtures must be secured to a frame that is duly qualified for the weight of the apparatus and the correct installation of the box is essential to meet the nominal load. If you are adding a very light device where there is no picture, you may be able to mount it using an “old work” or box “remodeling” that relies on drywall only where this is permitted by the local building code.
How to mount led ceiling light fixtures, determine the location of the electrical box for the accessory. Usually this will be next to a ceiling / beam or beams between two grounds. If necessary, use a stud finder or a hammer and finishing nail to locate the nearest beam. Keep the box against the drywall ceiling in the intended location, and trace around the outside of the box with a pencil. Make sure no power lines or plumbing behind the surface, then cut along the pencil line with a drywall saw.
Led ceiling light fixtures, Place the box so that their front edges are flush with the finished side of the drywall. Secure the box to the frame with screws or nails. Secure the mounting strap attachment to the box using the supplied screws or screws that come with the box. After making the appropriate connections cables, mount the accessory to the belt as needed.