Build a Rustic Cabin Furniture Idea
Rustic cabin furniture – Furniture cabinet is made of what is in the environment and what tools are available. Twigs and branches can be used to create basic, such as chairs, tables and benches furniture. Stumps can be used to keep them upright and sitting position – an immediate seat. Records can be converted into seats by leaving them all – like instant seats around the booth – or make cuts on them. A trunk cut in half may be attached legs for indoor use. But before using any wood, make sure it is free of insects and fungi.
Build rustic cabin furniture, Put glasses and gloves before working with wood. Wedge a record large between stones or other records to keep still, and mark half lengthwise. Cut along the mark, with a chain saw. Take one half and cut along again, creating a table of 3 inches deep. Cut a “V” on top of two smaller trunks this will create feet for the bank. Place the larger half of the large log in, flat feet up. Adjust the shape of “V” accordingly.
Build rustic cabin furniture; Place the seat to the legs with long screws, drilled at an angle at the top of the feet in “V” so that they reach at least an inch in the seat of the recording medium. Create your back supports with branches around the same length as the seat, whittling down to a point at one end with a pocket knife. Hold the 3 – inch plank against the branches and adjust the height until it is at a comfortable level. Attach to the branches with screws. Sand off the rough edges with sandpaper and / or a wood rasp hand. Applying a finish if desired.